| Skates features |
 |
HLS System (Heel Lock Stabilizer)
The patent-pending HLS System eliminates skater’s heel slippage and dramatically increases skater’s control & comfort. |
 |
Rolled Top Comfort Collar
Provides the finest boot collar in the industry, increases skater comfort and eliminates lower leg irritation. |
 |
Anti-Rotational Tongue Lace Bar
Eliminates unwanted tongue rotation to enhance fit, comfort and support. |
 |
Ribbed Forefoot Flex
Enhances individualized fit allowing for comfort flex of the small toe and ball area of the boot. |
 |
Cork Heels & Midsoles
Dramatically reduces boot weight and provides for shock-absorbing landings. Require low maintenance. |
 |
Flex Notch Design
Improves individualized fit and forward boot flex without sacrificing lateral support. |
 |
Extended Open Throat Design
Wider lacing pattern provides for improved forefoot comfort and enhanced skating balance. |
 | Heat Activated Reinforcements
All Riedell skating boots provide for heat activated individualized fit. |
|
Ultra sensitive heat activated reinforcement provides the ultimate in comfort and support. The following procedure should be used for maximum effectiveness of Riedell’s heat activated individualized fit features.
|
1. Properly measure for correct skate size.
2. Preheat warming oven to 200 degrees F.
3. Place open boots in oven for 8 minutes.
4. Remove boots from oven and flex back counters open.
5. Place on skater’s foot and tie boots extra snug.
6. Leave skates on skater for 5 minutes.
7. Remove skates from skater’s feet, allow skater to relax their feet, replace skates on skater using normal lacing pressure, and leave on skater for 2 minutes.
8. If a specific problem exists, remove skates; heat problem area with heat gun, adjust with boot press as needed.
9. Re-fit skates using normal lacing pressure.
10. Enjoy your new skates! Individualized heat activated fit complete.
|
|
| |
